Products
Form 4
Leverage materials optimized for impact resistance, rigidity, flame retardancy, flexibility, and more. Non-acrylate chemistries like true silicone, ceramic, and polyurethane materials. Certified third-party materials and open license available.
- Unmatched print success rate
- Advanced materials for any application
- Rivals injection molded parts
Artish 300 Pro
- Build Volume (X * Y * Z): 300 * 300 * 320 mm.
- Print Head System: Single Extrusion Print Head with Dual Drive Direct Extruder Mechanism.
- Filament Diameter: 1.75 mm.
- Heating Bed type and Build Plate Temperature: Silicon Heat Bed & 120 ºC.
- Build Plate Leveling: Auto Bed Leveling.
- Nozzle Type- Swappable Nozzle.
- Nozzle temperature: Up to 285 ºC.
- Filament Sensor: Filament Runout and Clogging Detection.
- Motion Mechanism:
- X on Belt Drive with Rail Guide.
- Y on Belt Drive with Rail Guide.
- Z on two Ball Screw and Chromium Coated Steel Rods.
- Chamber Type: Fully Enclosed Chamber with Separate Filament Box.
- Power Loss Recovery: Available.
- 3rd Party Filament Supported: Yes.
- Supported Materials: PLA, ABS, PETG, ASA, TPU, PLA Carbon Fibre, PETG Carbon Fibre.
Artish 700
- Build Volume (X * Y * Z): 700 * 500 * 500 mm.
- Print Head System: Single Extrusion Print Head with Dual Drive Direct Extruder Mechanism.
- Filament Diameter: 1.75 mm.
- Heating Bed type and Build Plate Temperature: Silicon Heat Bed up to 120 ºC.
- Nozzle Type- Swappable Nozzle.
- Nozzle temperature: Up to 285 ºC.
- Filament Sensor: Filament Runout and Clogging Detection.
- Motion Mechanism:
- X on Belt Drive with Rail Guide.
- Y on Belt Drive with Rail Guide.
- Z on four Ball Screw and Chromium Coated Steel Rods.
- Chamber Type: Fully Enclosed Chamber with Separate Filament Box.
- Power Loss Recovery: Available.
- 3rd Party Filament Supported: Yes.
- Supported Materials: PLA, ABS, PETG, ASA, TPU, PLA Carbon Fibre, PETG Carbon Fibre.
BX 1200
- Build Volume (X * Y * Z): 1200 * 1000 * 1000 mm.
- Print Head System: Single Extrusion Print Head with Dual Drive Direct Extruder Mechanism.
- Filament Diameter: 1.75 mm.
- Heating Bed type and Build Plate Temperature: Silicon Heat Bed up to 120 ºC.
- Nozzle Type- Swappable Nozzle.
- Nozzle temperature: Up to 285 ºC.
- Filament Sensor: Filament Runout and Clogging Detection.
- Motion Mechanism:
- X on Belt Drive with Rail Guide.
- Y on Belt Drive with Rail Guide.
- Z on four Ball Screw and Chromium Coated Steel Rods.
- Chamber Type: Fully Enclosed Chamber with Separate Filament Box
- Power Loss Recovery: Available.
- 3rd Party Filament Supported: Yes.
- Supported Materials: PLA, ABS, PETG, ASA, TPU, PLA Carbon Fibre, PETG Carbon Fibre.
Peel 3 3D scanner
Peel 3 is an affordable turnkey 3D scanning solution that offers the level accuracy, reliability and repeatability you need.
- High-fidelity objects
- Digital archiving
- Human anatomy
- Orthotics and prosthetics
- Converts handmade objects to digital
We Provide the Best Products in Industry
Contact Us today by filling the form below.